info@wesolve.se

+46 60 789 20 00

Södra Förmansvägen 12, 863 41 Sundsvall

The fastest and easiest way to test your pulp samples

Serial testing

ViscMatic 1050 can run up to 10 pulp sample tests in a series at once.

New technology

The new dissolving technology even the toughest pulp samples will be dissolved for testing within 10 minutes.

ISO Standard

Fully automatic way of testing pulp quality according to ISO 5351.

Safety

The lab technician never has to be exposed to the CED solution during the measurement process.

About ViscMatic 1050

WeSolve AB/PROAC AB and LabService AB have collaborated in the development of the third generation of VISCOMAT, now named ViscMatic 1050.

ViscMatic 1050 is now fully automatic after the pulp sample has been arcaded. ViscMatic 1050 can run 10 pulp sample tests in series at once, you add up to 10 pulp samples into different test chambers and then you only have to assign each chamber with the pulp weight. Either you do the weighing with your existing balance, or you can have the ViscMatic 1050 with the optional integrated lab balance.

Hereafter the ViscMatic 1050 is fully automatic. It doses the correct amount of water and CED solutions to the test chambers and it dissolve the pulp samples. Thanks to our new dissolving technology, stirrlonic, even the toughest pulp samples will be dissolved for testing within 10 minutes.

Measurements is made by using a glass capillary according to the ISO 5351 standard. The test chambers is then automatic emptied and rinsed before any subsequent measurements.

The lab technician never has to be exposed to the CED solution during the measurement process.

Interface:
9" touch display

Weight:
70kg

Dimensions:
1120x580x735
(WxDxH)

Specifications

  • PLC control unit
  • Software for analysis according to ISO 5351
  • 9" touch display
  • 10 integrated test chambers
  • Glass capillary
  • High precision pumps for water and CED solution
  • New dissolving technology equipment, stirrlonic
  • Integrated water bath, controlled to be 25°C
  • USB interface, to be used for optional lab balance, printer etc.
  • LAN interface, communication with aux. equipment (optional)
  • PROFINET interface, programming
  • Serial (RS-232) interface, to be used for optional lab balance
  • Weight: 70 kg
  • Dimensions: 1120 x 580 x 735 (W x D x H)

Pneumatic chart

Flow chart

Installation requirements

  • Power supply: 100-240 VAC, 50/60 Hz 225 W
  • Ambient Temperature: 0-30°C
  • Operating humidity: 20-95%
  • Pneumatic air, 2 OD 8 mm quick connection inlet/outlet
  • Vacuum, OD 6 mm quick connection
  • Waste, OD 6 mm quick connection
  • Water, OD 6 mm quick connection
  • CED, OD 6 mm quick connection
  • Nitrogen, OD 6 mm quick connection
  • Temperated controlled 25°±0.1°C (77°±0.18°F) water, 2 OD 12 mm quick connection

Optional equipment

  • Lab balance, fully integrated to the Viscmatic 1050
  • Printer, for labelling

Contact us

For more information, please contact us:

Södra Förmansvägen 12
863 41 Sundsvall

info@wesolve.se

+46 60 789 20 00

You can also fill out this form to get in contact with us:

Copyright © 2019 WeSolve AB